Shower Regrouting Perth

Cracked, pitted and porous sand-based grout or mouldy separated silicone are common causes of a leaking shower. Other areas that can contribute to a shower leak is a deteriorated shower screen and or plumbing.

Through these areas water can pass beneath the surface of the tiles and be absorbed by the surrounding walls, skirting boards and flooring. Visible signs can include swollen skirting boards, bubbling paint work, damp carpets, rusty door frames and damaged cupboards. These are all tell tail signs that you have a leaking shower. Here at AllSealedWA we offer obligation free quotes and electronic water detection tests. After diagnosing the cause, we meticulously explain the repair method and provide a formal written quote.

An AllSealedWA shower regrout repair service details all areas within your leaking shower recess to prevent further water penetration causing costly and unsightly damage. Through the use of our exclusive high-quality epoxy grout and silicone sealants, a standard grout shower repair service is a cost-effective solution without the need to remove tiles. A full regrout of your shower recess will take between 3-4 hours on average and it can be used the next day!

WHAT WE DO

Here at AllSealedWA we offer obligation free quotes and electronic water detection tests. After diagnosing the cause, we meticulously explain the repair method and provide a formal written quote.

An AllSealedWA shower regrout repair service details all areas within your leaking shower recess to prevent further water penetration causing costly and unsightly damage.

Through the use of our exclusive high-quality epoxy grout and silicone sealants, a standard AllGrout shower repair service is the cost-effective solution without the need to remove tiles.

A full regrout of your shower recess will take between 3-4 hours on average and it can be used the next day!

Call us now 1300 884 117 for an obligation free, onsite assessment.

tile repairs in Perth

PERTH'S GROUT REPLACEMENT AND REPAIRS EXPERTS

Overtime existing sand based grouts become old, they oxidise, change colour and get so dirty that it is hard to clean or keep clean. Before you think renovation is the only way to fix this, why not consider a tile regrout. Regrouting the area is a very cost effective solution that can rejuvenate and restore your tiling back to its original standard. If left untreated for a long period this can potentially cause costly leaks and damage to surrounding areas, not to mention all the nasties that can reside in the grout.

AllSealedWA are your local regrouting specialists and can perform the task effectively and efficiently using either our exclusive AllGrout (epoxy grout) product or a high grade sand based grout product where suited.

Whether it is your leaking shower, leaking balcony, other wet area or even the tiled flooring throughout your home, AllSealedWA can skilfully treat all these areas.

OUR SIMPLE PROCESS

1
phone icon

Request a Quote

Call 1300 884 117 or email [email protected] to arrange a suitable time.

2
obligation free icon

Obligation Free Consultation

A friendly AllSealedWA team member will personally meet with you at the property.

3
shower

Diagnosis, Explanation & Written Quote

During your consultation the leaking shower or balcony will be diagnosed using an electronic water detector. This includes a full explanation and a written quote provided.

4
leak

Leak Repaired

A fully trained AllSealedWA technician carries out the service using our exclusive range of products.

5
service icon

Peace of Mind

The exclusive AllGrout product is backed by a 25 Year Product Warranty.

TESTIMONIALS

WHY RE-GROUT INSTEAD OF RE-TILE?

  • Save on renovation costs: Regrouting is a fraction of the cost of retiling, allowing you to refresh your shower without the high price tag of a full renovation.
  • Faster turnaround time: A typical regrouting job takes just a few hours, meaning minimal disruption to your household and no need to avoid the bathroom for days.
  • No need to remove tiles: If your tiles are still in good condition, regrouting restores their look and waterproofing without the mess and labour involved in removing and replacing them.
  • Extend the life of your existing tiles: Regrouting removes the damaged grout and reseals your shower, helping to prevent water ingress and prolonging the life of your tiled surfaces.
  • Improved appearance without a full remodel: New grout instantly lifts the look of your shower, making it cleaner, brighter, and more modern—perfect for a refresh before selling or renting.
  • Better hygiene and safety: Old grout can harbour mould and bacteria. Regrouting removes these health hazards and restores a clean, sealed surface that’s easier to maintain.

COMMON SHOWER ISSUES WE FIX

  • Cracked or deteriorating grout lines: Over time, grout can become brittle and break away, allowing water to seep through and damage underlying surfaces.
  • Mould and mildew growth: Poor ventilation and old, porous grout create the perfect environment for mould and mildew, which not only look bad but pose health risks.
  • Discoloured and stained grout: Grout naturally darkens over time due to soap scum, hard water, and cleaning products—making your shower look aged and unhygienic.
  • Water leaks behind tiles: When grout or waterproofing fails, water can leak behind shower tiles, leading to structural damage, bubbling paint, and rotting wall materials.
  • Loose or drummy tiles: Water ingress and weakened adhesives can cause tiles to loosen or become hollow-sounding, increasing the risk of tiles falling off.
  • Grout erosion from aggressive cleaners: Many store-bought cleaning products wear down grout over time, thinning the lines and making them prone to leaks.

Frequently Asked Questions

Most full shower regrouts take around 3–4 hours. You can typically use the shower the next day.

No! Our regrouting services work with your existing tiles to restore both function and appearance.

Yes, all regrouting work comes with a year warranty for peace of mind.

Yes, we clean and remove the affected grout, then apply new epoxy grout and sealants to prevent future issues.

In most cases, yes—if the leak is due to grout failure. We also offer water detection tests to confirm the source of leaks.

MAINTENANCE TIPS POST-RE-GROUTING

  • Allow proper curing time before use: Avoid using your shower for at least 24 hours after regrouting to ensure the new grout and sealants fully cure and set. Premature use can compromise the bond and waterproofing.

  • Use gentle, pH-neutral cleaning products: Harsh or acidic cleaners can degrade grout and silicone over time. Stick to mild, non-abrasive cleaners specifically designed for tiled surfaces to keep your shower looking fresh.

  • Squeegee after each use: After showering, use a squeegee to remove excess water from tiles and glass. This simple habit reduces water residue, prevents mould growth, and preserves the appearance of the grout lines.

  • Keep the shower well-ventilated: Proper airflow is essential in reducing moisture build-up. Use an exhaust fan or open a window during and after showers to help keep the area dry and prevent mould formation.

  • Avoid bleach and ammonia-based cleaners: These can break down grout sealants and silicone over time, reducing their effectiveness. Instead, use grout-safe alternatives to maintain durability.

  • Inspect grout and silicone regularly: Keep an eye out for early signs of wear such as small cracks, discolouration, or mould. Addressing these issues early can prevent costly water damage and extend the life of your shower.

Send a message

This field is hidden when viewing the form